AVer NXU8000 User Manual
Page 132
120
Using RTSP protocol: If the IP camera supports RTSP protocol, user can use RTSP
protocol to connect with IP camera.
-
Protocol:
Select the “RTSP_RTP” from drop-down list.
-
Model:
Please check user’s manual or vendor of IP camera.
-
Video Format: select format of video.
-
Channel: Select the channel that is going to be display on the surveillance monitor.
-
IP Camera Site: E
nter the RTSP URL and port for connection. Please check user’s
manual or vendor of IP camera to get RTSP URL and port. Different IP camera has
different RTSP URL and port.
The example of RTSP URL is “rtsp://10.1.1.2/video.sdp”.
-
Authentication: If the IP camera require connection authentication, enable
Authentication check box and enter ID and Password.
-
Enable Audio: If IP camera supports audio, click it to enable.
Click Connect button to connect with IP camera immediately. Click Save&Exit button only
save the configuration and exit current setup window.