Connecting the watchdog line to nv8416t, Nv8416t – AVer NXU8000 User Manual
Page 30
Advertising
18
2.5.8
Connecting the Watchdog line to NV8416T
1. Look for the labeled RESET SW switch lead and connect it to the NV8416T card reset pin.
2. Connect the supplied Watchdog line to the NV8416T card watchdog pin and the other end to the
motherboard RESET SW panel. If you are not sure, please refer to the motherboard user manual.
3. You may now replace back the PC cover and connect all the cables.
NV8416T
Reset SW lead
Watchdog line
Advertising
This manual is related to the following products: