AVer NXU8000 - Manual (Page 99)

87
- Enable Overlay
To enhance video signal for better video quality.
i
Enable Overlay doesn
’t support on Windows 7.
- Enable Liveplayback
Mark to enable live playback function on Preview UI when start to record. User should see the live
playback icon( ) on Preview UI.
- Increase memory usage of process
The DVR system supports 42 MP resolution in total for all IP camera channels. When Increase
memory usage of process function is disabled, the DVR system only supports 24MP resolution in
total for all IP camera channels.
i In 64bit Windows OS, Increase memory usage of process function is enabled in default.
In 32bit Windows OS, user need to enable the Increase memory usage of process function
manually.
- Screen Saver
Set a period time to enter screen saver mode when system idle.
- Leave the system without asking user name and password
Don’t need to enter password when close/exit DVR program.
- Resequence channels when autoscan
The DVR system will re-arrange the channels order if some of channel is disable when auto scan
is enabled. For example, CH 1 and 3 is disable, the channel will display in order of
CH2,4,5,6,7~16. The CH1 and 3 won’t be shown on screen when auto scan is enabled.
- Remember playback display mode
To memorize the last playback status. The DVR system will memorize the playback status from
last time that user has selected or setup for next time playback.
- Enhance IP camera performance in TV out
Mark to improve the IP camera video preview smoother on TV output.
- Auto Scan Period
Set the time gap of the Auto Scan function from 3 to 10 seconds. This automatically switches to
the next video in cycle depending on the set time gap.
- Temperature Display
Select the format of temperature -- °C or °F
- Playback Mode
Select the mode of playback the video.
 Select date and time: Select the date and time which user wants to playback.
 Play the last file: Automatically playback the video from the last hour
 Instant Playback: Automatically playback the video which has just recorded. To set the instant
playback time period, fill in the time in second at Set Instant Playback’s Play Time column.
- Date Format
Select the date format which wants to display in Select date and time playback mode