AVer NXU8000 - Manual (Page 181)

169
5.9.3 To Setup Call Out List
1. Next to the Make Phone Calls check box, click
Detail.
2. In the Call Out List, click Add to insert a new
contact number, Modify to edit the selected item,
Remove to delete the selected item, Test to check
if it is working.
3. In the Call Out Setting, enter the phone number
and description. Click to select existing sound
recorded massager and Record to make a new
voice message.
4. When the Sound Recorder appears, use the record
control panel to record, stop, play, rewind and
forward. If you want to save the file, click File >
Save As…, enter filename and click Save. Make
sure you have microphone connected to your PC.
The supported audio system is only 8KHz and
16Bit mono.
5. Click OK to exit and accept the setting and Cancel to exit without saving the setting.