To setup ftp setting, Chapter 5.9.6 – AVer NXU8000 User Manual
Page 183
171
5.9.5
To Setup FTP Setting
1.
Next to the File Transmission via FTP check box, click Detail.
2.
In the FTP Setting dialog box, enter the FTP Server (IP address), Port, ID and Password.
3.
In Number of Pic text box, enter the number of sequence images that want to send when file is
transmitting. The maximum number of picture can be transmitted are 16.
4.
If user wants to send the recorded image before alarm occurs, enter the time that before alarm
occurs in Before alarm(sec.).
5.
Upload image: Select the camera that the images will be captured and send when the any alarm
is triggered. If user select the Alarm Camera, then only when motion trigger, video loss, missing
or suspicious object/scene change will send out the alarm image.
6.
Click OK to exit and save the setting and Cancel to exit without saving the setting.