7) frame rate – AVer NXU8000 User Manual
Page 156
144
(6) Quality(Analog camera only)
Adjust the video quality. The higher the value, the lower the compression level and uses more hard
disk space.
(7) Frame Rate(Analog camera only)
Set the maximum and minimum number of frames to be recorded during motion and motionless state.
The frame rate ranges from 1 to 30 for NTSC and 1 to 25 for PAL. The higher the frame rate, it uses
more hard disk space. The Turbo function will be available when using 2 NV6480T card.
i
- For NV6480T card (16 channels), DVR system can record 30 frames in D1 mode when
only enable the first 8 channels.
- For NV6240T card (16 channels), DVR system can record 15 frames in D1 mode when
only enable the first 8 channels and records 30 frames in D1 mode when only enable
the first 4 channels.
- For NV6240T card (8 channels), DVR system can real time recording in D1 mode for all
8 channels.
- To enable and disable cameras, please go to Camera setting.
(8) Video Size(Analog camera only)
Select the size of the video and click the button. The higher the size, the larger the file it create. Y
(9) Mask/Shield Edit
Mask, mark an area on the screen to disregards the motion in the marked area and to only monitor
outside the marked area. As for the Shield, it covers an area on the screen and the covered area
would not be visible on the screen and recorded. (see also
(10) Enable Storage Optimization
Enable/disable to save more storage space. Click Detail button to select the type of storage
optimization.
Monochrome Mode: The video will record in black and white.
Noise Reduction: To do the noise reduction before compression.
Disable Video Enhancement: To shutdown video enhancement function.
User also can select the Default Mode High/Medium/Low. Click ? button to view default mode