FaxBack NET SatisFAXtion 9.0 - Fax Server Manual User Manual

Page 182

Advertising
background image

2D 
T6 
JPEG 
JBIG 
COLOR 
200H_400V 
300H_300V 
400H_400V 

allowed_receive_transfer_types [string]: These settings control the type of fax and file

 

 

 

 

 

 

   

 

 

 

transfers that the driver can perform for a device. Format: Comma separated list of the

 

 

 

 

 

 

   

 

 

 

 

   

 

following. Default: 

FAX,ECM,V34

 

FAX 
ECM 
V34 

allowed_send_image_types [string]: These settings control the image types that the

 

 

 

 

 

 

 

 

 

 

device can send and receive via the T.30 protocol over the telephone network. To receive or

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

send some image types, the corresponding

allowed_receive

/

send_transfer_type

setting must

 

 

 

 

 

 

 

 

 

include ECM. Format: Comma separated list of the following. Default: 

1D,2D,T6,JBIG

 

1D 
2D 
T6 
JPEG 
JBIG 
COLOR 
200H_400V 
300H_300V 
400H_400V 

allowed_send_transfer_types [string]: These settings control the type of fax and file

 

 

 

 

 

 

 

 

 

 

 

transfers that the driver can perform for a device. Format: Comma separated list of the

 

 

 

 

 

 

   

 

 

 

 

   

 

following. Default: 

FAX,ECM,V34

 

FAX 
ECM 
V34 

 

dial_prefix [string(20)]: Data to be prepended to dial strings, typically 9, if present. 
 

Class2 Device 

allowed_receive_baud_rates [string]: This setting restricts a modem to use only certain

 

 

 

 

   

 

 

 

 

 

baud rates. Use this to block a modem from using a rate or rates that it supports, but are

 

 

 

 

 

   

 

 

   

   

 

   

 

 

 

unreliable in your environment or are undesirable for some other reason. On transmitting, use

   

 

   

 

 

 

 

 

 

 

 

 

this as a mask; the modem will use only those rates you list. On receiving, set the fastest and

     

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

slowest rates; the modem will allow those and any in between.  
Format: Comma separated list of 14400, 12000, 9600, 7200, 4800 and 2400.  
Default: 14400,12000,9600,7200,4800,2400. 

 

allowed_send_baud_rates [string]: This setting restricts a modem to use only certain baud

 

 

 

 

   

   

 

 

 

 

rates. Use this to block a modem from using a rate or rates that it supports, but are unreliable

 

 

   

   

 

 

   

   

 

   

 

 

 

 

in your environment or are undesirable for some other reason. On transmitting, use this as a

 

 

   

 

 

 

 

 

 

 

 

 

     

mask; the modem will use only those rates you list. On receiving, set the fastest and slowest

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

rates; the modem will allow those and any in between.  
Format: Comma separated list of 14400, 12000, 9600, 7200, 4800 and 2400.  

Proprietary FaxBack, Inc. 2014

182 

Advertising