FaxBack NET SatisFAXtion 9.0 - Fax Server Manual - Manual (Page 190)

4.2.1.6 DotFax Plugin
rings_before_answer [dword 0–255]: Number of rings before modem accepts call. Default:
1
send_port_count [dword 0–65535]: Number of send­only ports to configure.
send_receive_port_count [dword 0–65535]: Number of send/receive ports to configure.
receive_port_count [dword 0–65535]: Number of receive­only ports to configure.
csid [string(20)]: The CSI for receive and the TSI for send.
4.2.1.7 Administration
Configuration key for the Administration program.
BillingCodeManager [string]: Path to BillingCodeManager.exe.
Reporting [string]: Path to Reports.exe.
Loader
(Default) [string]: Resource.dll offset.
4.2.1.8 Archive
Legacy Export module.
Activated [boolean]: Determines if legacy export module is loaded and functioning.
4.2.1.9 ASCIIPacketServer
AllowMissingFiles [boolean]: This parameter allows you to configure your system to deliver a
fax if ANY of the files requested exist. By default, ALL the requested documents must exist in
order for a packet to be processed and a fax submitted.
If AllowMissingFiles is set to 1, the Connector will still send a message even if some of the files
listed in the packet are missing. If AllowMissingFiles is 0 or not present, the usual behavior
prevails.
If AllowMissingFiles is 1 and all the files listed in the packet are missing, ASC2CAS will put the
following error in the finished packet:
[Logging]
FaxStatusNum = 2
FaxStatus=Nothing to send
AppendPageCountToFileName [boolean]: If 1, this setting enables a custom naming
convention (<filename>­<number_of_pages>.<extension>) applied to the image file received
when in SINGLE_CALL_RECV mode. This is a custom, limited implementation, where it’s
possible for a prior instance of a file results in the file not being deleted, e.g., when the number
of pages in an image change.
Client [string]: Undocumented.
Proprietary FaxBack, Inc. 2014 190