FaxBack NET SatisFAXtion 9.0 - Fax Server Manual User Manual

Page 61

Advertising
background image

 

 

Select the new 10 digit local dialing rule from the left side, and click “Add >>”. Then click OK. The

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

window will close. 

 

You can test the rule that was created by clicking the Validate button on the main Validation Editor

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

interface. Enter some example input numbers, and verify the OUTPUT: listed in the results window is

 

 

 

 

 

 

 

 

 

 

   

 

 

   

correct. 

 

2.6.3.5  Scenario: Dial As­Is (No Validation) 
 

2.6.3.7  Scenario: Adding Access Codes 
Some services need long­distance access codes or other access codes appended to the end of the fax

 

 

 

 

 

   

 

 

 

   

 

   

 

 

number. 

 

2.6.3.8  Adding Pauses to the Dial String 

AudioCodes: ‘p’ pauses, ‘w’ waits for dial tone. 

Class 1/Class 2: ‘,’ (comma) pauses. 

Brooktrout: ‘p’ pauses, ‘w’ waits for dial tone. 

 
 

2.6.4 ANI (Caller ID) 

When using Voice over IP, you must set your ANI. This will be used as your “From” phone number. Note that

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

only T1/PRI hardware will actually attempt to use the specified ANI to make a call, and even then the T1/PRI

 

 

 

 

 

   

 

 

 

   

   

 

 

 

 

 

 

service provider may override the ANI you set, or may even reject calls with an “invalid” ANI (as defined by that

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

 

   

 

particular service provider). 

 

To set global ANI, run the Change Server Settings utility, Start

Programs NET SatisFAXtion Change

 

 

 

 

 

 

 

 

 

 

   

   

 

   

 

Server Settings. Click on the Fax Hardware Settings button, and change to the General tab. Click OK when you

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

have set your ANI. 

 
 

2.6.5 Cover Sheet Templates 

Cover sheet templates are kept at the fax server as Rich Text Format (RTF) documents. Any

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

software that can create an RTF file or any file that can be converted to an RTF file can be used as

 

 

 

 

 

 

   

 

 

 

 

 

   

 

 

 

 

 

   

a cover sheet. There is no limitation as to how many cover sheets you may have on your fax

 

 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

server. 
 
Static information in the RTF file, such as a logo or street address, is combined with variable

 

   

 

 

 

 

   

 

 

 

   

 

 

 

information to generate cover sheets for all faxes in which a cover sheet is specified. The location

   

 

 

 

 

 

   

   

 

   

 

 

 

of variable information is identified in the RTF file through the use of placeholders. A placeholder is

 

 

   

   

 

 

 

 

 

   

   

   

replaced with the current value of the placeholder; for example: $(Date), $(SenderName),

 

 

 

 

 

 

 

 

 

 

 

 

$(Cover), etc. 

 

2.6.5.1  Cover Sheet Templates for Email Users 
There are 3 ways to identify a cover sheet template to be used for an email user: 

 

The default cover sheet template for the user Supervisor will make all users use that specified

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

Proprietary FaxBack, Inc. 2014

61 

Advertising