STIEBEL ELTRON SOM 9s - Manual (Page 72)

© Stiebel 11091_SOM_9s.mon
us.ind
d
| 72
SOM 9s
4 Status menu During normal operation of the controller, the display is in
the status level. This one indicates the measurement values
shown in the table.
In addition to the adjustment values, possible error messages
are indicated in the status menu (see chap. 98).
Display Description
BLPR1 Blocking protection R1
BLPR2 Blocking protection R2
BLPR3 Blocking protection R3
INIT Initialization
FLLT Filling time
STAB Stabilization
TCOL Temperature collector
TCOL1 Temperature collector 1
TCOL2 Temperature collector 2
TSTB Temperature tank bottom
TST1B Temperature tank 1 bottom
TSTT Temperature tank top
TST2B Temperature tank 2 bottom
TSFL Temperature solar flow
TSRE Temperature solar return
TSFB Temperature solid fuel boiler
TSTR Temperature tank return preahting
TRET Temperature - return
S3 Temperature sensor 3
S4 Temperature sensor 4
S5 Temperature sensor 5
n1 Speed relay 1
n2 Speed relay 2
n3 Speed relay 3
Display Description
n4 Status relay 4
h R1 Operating hours relay 1
h R2 Operating hours relay 2
h R3 Operating hours relay 3
h R4 Operating hours relay 4
L/h Flow rate Grundfos sensor
BAR System pressure
TSFL Temperature solar flow VFS
TSRE Temperature solar return RPS
TFHQM Temperature flow energy metering
TRHQM Temperature return energy metering
L/h Flow rate V40 or flow gauge
kWh Heat quantity in kWh
MWh Heat quantity in MWh
TDIS Temperature thermal disinfection
CDIS Countdown thermal disinfection
DDIS Heating period thermal disinfection
TIME Time
DATE Date
* R4 is a standard relay not suitable for speed control. Therefore,
its status is indicated with 0 % or 100 % respectively.