STIEBEL ELTRON SOM 9s - Manual (Page 93)

© Stiebel 11091_SOM_9s.mon
us.ind
d
93 |
SOM 9s
Messages possible Description
FSYS File system error
CTYP Card type is not supported
WRIT Error during writing
NOCRD No card in slot
LOGG Logging is possible
WRITP Card is write-protected
CFULL Card full
RTIME Remaining logging time in days
OSDC / FORM
Format card
When LLOg is activated, data logging will stop if the capa-
city limit is reached. The message CFULL will be displayed.
When LLOg (linear logging) is deactivated, the oldest data
logged onto the SD card will be overwritten as soon as the
capacity limit is reached.
OSDC / LLOG
Linear logging
Selection: ON / OFF
Factory setting: OFF
OSDC / REMC
Safely remove card
Selection: ON / OFF
Factory setting: OFF
OSDC / LOGI
Logging interval
Adjustment range: 1 ... 1200 s
Factory setting: 60 s
Language
In this adjustment channel, the menu language can be
chosen.
• dE : German
• En : English
LANG
Language
Selection: dE,En
Factory setting: En
SD card
If an SD card is used, COM is shown on the display. If the SD
card is full, COM is flashing.
Starting the logging
Î Insert the SD card into the slot
Logging will start immediately.
Î Adjust the desired logging interval
OSDC / OSDC
SD card
Selection: ON / OFF
Factory setting: OFF
Messages possible Description
REMC Safely remove card command
-REM Card is being removed
FORM Formatting SD card command
--FORM Formatting in progress
LOGI Logging interval in min
LLOG Linear logging
Completing the logging process
Î Select the menu item ReMC
Î After -ReM is displayed remove the card from the slot
Formatting the SD card
Î Select the menu item FORM
During the formatting process, --FORM will be displayed.
The content of the card will be deleted and the card will be
formatted with the FAT file system.
note:
Because of the increasing size of the data packets,
the remaining logging time does not decrease
linearly. The data packet size can increase, e. g.
with the increasing operating hours value.