KEYENCE LS-7000 - Manual (Page 34)

1-20
1
Chapter 1 Getting Started
Setting Overview
The LS-7000 Series is in measurement operation according to a variety of settings. The
following section provides information on each mode in detail and how to switch between
modes.
Tolerance Setting
Environment Settings
Program Settings
RUN Mode
HI GO LO
The above keys
can be pressed to
make tolerance
settings whether or
not the LS-7000
Series is in
measurement
operation.
Make basic settings for the
operation of the LS-7000
Series.
(See Section 4 Tolerance(LIMIT)
Settings on page 4-50) (See Section 3 Operation Control on
page 3-1)
(See Section 5 Environment
Settings on page 5-1)
See Section 4 Function Settings on page 4-1.
Settings for measurement are registered as programs. The following settings
are possible.
• Area Setting
Set the measuring part.
• Compensation Setting
Set the compensation detail of errors in measurement.
• Output Setting
Set the processing and output details of the measuring value.
• Option Setting
Set the display unit and other items.
Measures according to the set
program.
The LS-7000 Series will be reset to the initial status by turning
the LS-7000 Series ON with the key pressed. (Page 1-21)
Power
On
PROG
PROG PROG
ZERO
Press the key
while pressing the
key. PROG
FUNC
TIM
LO
GO
HI
OUT 2
OUT 1
HI
GO
LO
TIM
LO
GO
HI
OUT 2
OUT 1
FOCUS
2
1 A R E A POSITION
HI
GO
LO