KEYENCE LS-7000 - Manual (Page 35)

1-21
1
Chapter 1 Getting Started
AREA DISP
HOLD
ZERO
TIM
LO
GO
HI
OUT 2
OUT 1
ESC PROG
FOCUS
2
1
A R E A POSITION
HI
GO
LO
HIGH-ACCURACY CCD MICROMETER
PRINT
ESC PROG
FUNC ENT
Resetting to Initial Status
The following section provides information on how to reset all the programs and environ-
ment settings to factory-set values.
Tips Refer to 5-2 Resetting All Programs on page 5-5 if the resetting of only the
programs to factory-set values is required.
1
Turn on the LS-7000 Series with the
ZERO key pressed.
This display will appear when the LS-
7000 Series is turned ON.
2
Press the or key and select
Yes.
3
Press the ENT key after the initializa-
tion of the LS-7001 is confirmed.