KEYENCE LS-5000 - Manual (Page 100)

Chapter 8 RS-232C I/O
94
8
■ Operating Procedure
Example: Turn ON the synchronous input.
Note 1: The operating procedure for functions other than “synchronous input: ON”
is similar to the above.
Note 2: The timing, reset and auto-zero terminal input, and the RS-232C command
input can be simultaneously used.
Control Command 2
Command list III
1. Upper line: Character code, Lower line: ASCII code
Note 1: # is a character code between 1 and 16, or the ASCII code corresponding
to the character code.
1 to 16: The program number can be changed to a number between 1 and 16.
Note 2: When the LS-5000 series receives the ASCII (character) code given in
code list III, it performs the specified operation.
LS-5000 series
During
measurement
During
measurement
Synchronous input for
OUT1 is turned ON
Personal computer
Sends [T] [1] [CR]
End
Function Command received 1. Description
Program No. [P] [#] [#] [CR] Program number is changed
Selection 50H##0DH