KEYENCE LS-5000 - Manual (Page 16)

Chapter 2 Before Using the LS-5000 Series
10
2
■ Connecting Transmitter and Receiver
1. Connect the cable between the transmitter and receiver.
Use the extension cable if necessary.
Extension cable between transmitter and receiver: OP-26540 (3 m)
OP-26816 (10 m)
2. Connect the cable between the transmitter and receiver to the scanning head
and ROM board. (This cable is optional.)
Connection cable
LS-C3
3 m
LS-C10 10 m
LS-C50 50 m
Transmitter Receiver
Transmitter Receiver
LS-C3 (3 m)
To ROM board