KEYENCE LS-5000 - Manual (Page 15)

Chapter 2 Before Using the LS-5000 Series
9
2
CAUTION
2.1.2 Connection Procedure
Connecting the Scanning Head
Be sure to turn the power off before connecting the scanning head.
■ Connection of ROM Board
1. Remove the frame cover.
2. Insert the ROM board.
Note: Insert the ROM board into HEAD 1 first.
3. Tighten the screws.
4. Re-attach the frame cover.
Frame cover Frame cover
LS-5501 LS-5001
LS-5001
Screws Screws
LS-5501 LS-5001
Frame cover Frame cover
LS-5501 LS-5001
LS-5501