KEYENCE LS-5000 - Manual (Page 25)

19
Chapter 4 Installation
4
4.2 Mounting the Controller
This section describes how to mount the controller (LS-5001).
Mounting the LS-5001
The LS-5001 can be mounted to a DIN rail.
Hook the upper claw first, and then press the controller against the DIN rail until it
clicks.
DIN rail
Mounting the Scanning Head Front Protection Cover (For LS-5121)
Application example of front protection cover
The LS-5121 transmitter and receiver come with a protection cover for the scan-
ning head.
Mount the cover as shown in order to prevent the front glass of the scanning head
from being scratched or broken.
Receiver
LS-5121T
SCANNING AREA
LS-5121R
SCANNING AREA
Transmitter