KEYENCE LS-5000 - Manual (Page 123)

Appendices
117
Appendices
PITCH Mode
Item Initial setting
Display Data Display output OUT1: ON
OUT2: OFF
OUT3: OFF
OUT4: OFF
Limit Setup 1. Upper limit 0.01 mm (0.010000 inch)
Reference value 1.0000 mm (0.100000 inch)
Lower limit 0.01 mm (0.010000 inch)
Program No. 1
No. of pitches 10
Mask 1: Pitch No. 0
Masking Mask 2: Pitch No. 0
Mask 3: Pitch No. 0
Options No. of averaging 8
measurements
Digit supression None
M. Mode Normal
Self-Timing Interval (ms) 100
1. The same tolerance values have been set for all scanning heads.