KEYENCE N-400 - Manual (Page 136)

Appendices
128
Appendices
Program for the SYSMAC-C series
Specify the head address of the data
memory area for each ID number.
The N-400 processes data as binary
data. Specify each DM number in
binary format.
Specify the data memory flag for each
ID number as “2”. (To use the flag,
select “Sequential processing”.)
Enter “0000” for the reading trigger input
of ID No. 1.
Enter “0001” for the reading trigger
input of ID No. 2.
Enter “0002” for the reading trigger
input of ID No. 3.
BCD Binary
100 64
200 C8
300 12C
M9038
0000
0000
0001
0002
0002
0002
25313
25506
MOV
#0064
DM0000
MOV
#0001
DM0032
MOV
#0008
DM0001
MOV
#0000
DM0032
MOV
#012C
DM0002
MOV
#0001
DM0033
MOV
#0002
DM0100
MOV
#0000
DM0033
MOV
#0002
DM0200
MOV
#0100
DM0003
MOV
#0002
DM0300
MOV
#0001
DM0031
MOV
#0002
DM0100
MOV
#0000
DM0031
[Data stored in D103 and
subsequent areas is
processed.]
When DM0100 becomes “3”, the
specified processing is performed.
After processing is completed, enter “2”
in DM0100.