KEYENCE N-400 - Manual (Page 53)

Chapter 3 N-400 Setup Procedure
45
3
Saving updated settings in a file
1. To save updated settings in a file, click on [Save]. The following screen will
appear.
2. Click on the file name entry field, and enter a file name using the keyboard.
Specify a file name within eight characters. Be sure to add the extension “NCF”.
After entering the file name, click on [OK] to save the file.
Note: This software cannot accept a long file name in Windows 95.
When the saved setting file is sent to the N-400, the name of the file is simulta-
neously sent to the N-400. When you read the settings of the N-400 using this
software, the file name is also read. It is convenient for maintenance since you can
find the file that stores the settings.
To enter a file name, use alphanumerics (letters and numbers) only. Otherwise, the
file name cannot be sent to the N-400, because it can only recognize alphanumer-
ics. To send a file name, be sure to enter the file name using alphanumerics and
then save it. (If the file name is not saved, it cannot be sent to the N-400.)
Tips