EXFO IQS-2400 WDM Laser Source for IQS-500/600 - Manual (Page 110)

SCPI Command Reference
104 IQS-2400
Product-Specific Commands—Description
:SOURce[1..n]:POWer[:LEVel]
[:IMMediate][:AMPLitude]
Description This command sets the source output power
level. This value can be set even if the source is
off.
At *RST, the power level is device-dependent.
Syntax :SOURce[1..n]:POWer[:LEVel][:IMMediate][:AM
PLitude]<wsp><Power[<wsp>DBM|W]>|
MAXimum|MINimum|DEFault
Parameter(s) Power:
The program data syntax for <Power> is defined
as a <numeric_value> element followed by an
optional <SUFFIX PROGRAM DATA> element.
The allowed <SUFFIX PROGRAM DATA>
elements are: DBM|W. The <Power> special
forms MINimum, MAXimum and DEFault are
accepted on input.
MINimum allows to set the instrument to the
smallest supported value.
MAXimum allows to set the instrument to the
greatest supported value.
DEFault allows the instrument to select a value
for the <Power> parameter.
The <Power> parameter is the new source
output in watts or in dBm. If you do not specify a
unit, the device will use the current power unit.
To select the current power unit, use the
UNIT[1..n]:POWer command.