EXFO IQS-2400 WDM Laser Source for IQS-500/600 - Manual (Page 123)

SCPI Command Reference
WDM Laser Source 117
Product-Specific Commands—Description
:SOURce[1..n]:POWer:STATe
Description This command turns the optical source on or off.
When source is on, the red LED (Active) on the
front of the instrument lights up.
*RST sets the optical source to OFF.
Syntax :SOURce[1..n]:POWer:STATe<wsp>
<PowerState>
Parameter(s) PowerState:
The program data syntax for <PowerState> is
defined as a <Boolean Program Data> element.
The <PowerState> special forms ON and OFF
are accepted on input for increased readability.
ON corresponds to 1 and OFF corresponds to 0.
The <PowerState> parameter is the new power
state of the source.
1 or ON, turns the optical source on.
0 or OFF, turns the optical source off.
Example(s) SOUR:POW:STAT ON
Notes When the user is under Food and Drug
Administration (FDA) jurisdiction, a password
must be entered before turning the laser on.
See Also SOURce[1..n]:POWer:STATe?