EXFO IQS-2400 WDM Laser Source for IQS-500/600 - Manual (Page 177)

SCPI Command Reference
WDM Laser Source 171
Product-Specific Commands—Description
:SOURce[1..n]:WAVelength:LIMit:
HIGH?
Description Depending on the current spectral units this
query returns the maximum wavelength or the
minimum frequency at which the laser can be
set with the SOURce[1..n]:APCOutput command.
*RST has no effect on this command.
Syntax :SOURce[1..n]:WAVelength:LIMit:HIGH?
Parameter(s) None
Response Syntax <LimitHight>
Response(s) LimitHight:
The response data syntax for <LimitHight> is
defined as a <NR3 NUMERIC RESPONSE DATA>
element.
The <LimitHight> response is the highest
selectable wavelength in meters or the lowest
selectable frequency in Hz. To select the current
spectrum unit, use the UNIT[1..n]:SPECtrum
command.
Example(s) SOUR:WAV:LIM:HIGH?
See Also SOURce[1..n]:APCOutput
SOURce[1..n]:WAVelength:LIMit:LOW?
SOURce[1..n]:WAVelength:LIMit:STEP?
UNIT[1..n]:SPECtrum