EXFO IQS-2400 WDM Laser Source for IQS-500/600 - Manual (Page 43)

Setting Up the WDM Laser Source
WDM Laser Source 37
Saving and Recalling Configurations
Saving and Recalling Configurations
Once you have set the IQS-2400 WDM Laser Source parameters, you can
save your custom configuration and recall it at any time. You can also recall
the factory-defined settings.
Saved configurations include all parameters set in the Control Center
(Instrument function tab) and in the Settings function tab (if present).
To save a configuration:
1. Select the Configuration function tab.
2. In the Current Module Configuration panel, enter the name you wish
to use for your configuration file.
It will be saved in
“D:\IQS Manager\Configuration Files\(your_module)\”.
3. Click Save.
To save parameters being used
just before shutting down,
overwriting the previous file.
To always use the last saved
parameters when starting.