EXFO IQS-2400 WDM Laser Source for IQS-500/600 - Manual (Page 146)

SCPI Command Reference
140 IQS-2400
Product-Specific Commands—Description
Response(s) RangeStep:
The response data syntax for <RangeStep> is
defined as a <NR3 NUMERIC RESPONSE DATA>
element.
The <RangeStep> response is the minimum
step available for the specified range of
frequency in hertz.
Example(s) SOUR:PULM:LIM:FREQ:STEP? 2
Notes An attempt to change the frequency by less than
the minimum step will be ignored.
See Also SOURce[1..n]:PULM:INTernal:FREQuency[1|2]?
SOURce[1..n]:PULM:INTernal:FREQuency[1|2]
SOURce[1..n]:PULM:STATe
SOURce[1..n]:PULM:STATe?
SOURce[1..n]:PULM:LIMit:FREQuency:DMAX?
SOURce[1..n]:PULM:LIMit:FREQuency:DMIN?
SOURce[1..n]:PULM:LIMit:FREQuency:OMAX?
SOURce[1..n]:PULM:LIMit:FREQuency:OMIN?
SOURce[1..n]:PULM:LIMit:FREQuency[:RANGe]:
COUNt?
SOURce[1..n]:PULM:LIMit:FREQuency[:RANGe]:
HIGH?
SOURce[1..n]:PULM:LIMit:FREQuency[:RANGe]:
LOW?
:SOURce[1..n]:PULM:LIMit:FREQuency
[:RANGe]:STEP?