EXFO IQS-2400 WDM Laser Source for IQS-500/600 - Manual (Page 96)

SCPI Command Reference
90 IQS-2400
Product-Specific Commands—Description
The value used must be equal to or between the
values returned by
SOURce[1..n]:WAVelength:LIMit:LOW? and
SOURce[1..n]:WAVelength:LIMit:HIGH?. The
SOURce[1..n]:WAVelength:LIMit:STEP? query
returns the instrument sensitivity.
³
Power:
The program data syntax for <Power> is defined
as a <DECIMAL NUMERIC PROGRAM DATA>
element followed by an optional <SUFFIX
PROGRAM DATA> element. The allowed
<SUFFIX PROGRAM DATA> elements are:
DBM|W.
The <Power> parameter represents a new
power of the signal in watts or dBm. If you do not
specify a unit, the device will use the current
power unit. To select the current power unit, use
the UNIT[1..n]:POWer command.
The value used must be equal to or between the
values returned by
SOURce[1..n]:POWer:LIMit:LOW? and
SOURce[1..n]:POWer:LIMit:HIGH?. The
SOURce[1..n]:POWer:STEP? query returns the
instrument sensitivity.
Example(s) SOUR:PULM:STAT ON
SOUR:WAV:MODE NORMAL
SOUR:APCO 1547nm ,7.39DBM
:SOURce[1..n]:APCOutput