EXFO IQS-2400 WDM Laser Source for IQS-500/600 - Manual (Page 59)

Controlling Multiple WDM Laser Source Modules
WDM Laser Source 53
Controlling a Single IQS-2400 WDM Laser Source
To set delta current:
Delta current will be used with High Wavelength Stability and On/Off
Modulation modes.
For information, see Configuring Power or Delta Current on page 30.
Controlling a Single IQS-2400 WDM Laser
Source
You may want to control a specific module among all the IQS-2400 WDM
Laser Source modules that you have in the system.
To control a specific IQS-2400 WDM Laser Source:
1. Make sure that the row corresponding to the module you want to
control appears in bold or that it is highlighted.
2. Use the Control Single Instrument button to open the IQS-2400 WDM
Laser Source application.
Delta current parameter controls