EXFO IQS-2400 WDM Laser Source for IQS-500/600 - Manual (Page 99)

SCPI Command Reference
WDM Laser Source 93
Product-Specific Commands—Description
SOUR:STAB? (repeat until the returned value is
not 1)
SOUR:CURR:ACCB 0.0854
Notes The current properties of the laser may change
with time. For this reason, if a setpoint was
defined in High Wavelength Stability or On/Off
modulation mode, and you want to return to it at
a later date, the wavelength and power may
differ from those defined with the current step
and temperature step when the setpoint was
created. To cancel this effect, when creating a
setpoint in these modes, the base current is
recorded internally. This base current is sent to
the instrument when returning to the mentioned
setpoint. All this is done automatically and is
transparent to the user.
See Also SOURce[1..n]:CURRent:ACCBase?
SOURce[1..n]:STABle?
SOURce[1..n]:WAVelength:MODE
SOURce[1..n]:WAVelength:MODE?
:SOURce[1..n]:CURRent:ACCBase