EXFO IQS-2400 WDM Laser Source for IQS-500/600 - Manual (Page 94)

SCPI Command Reference
88 IQS-2400
Product-Specific Commands—Description
Notes This command must only be used when the
instrument is either in High Wavelength Stability
or On/Off modulation mode. If the instrument is
not in one of these modes, the parameters will
be read as a requested wavelength and a
requested power. This will generate the error
message: “Invalid instrument mode”.
See Also SOURce[1..n]:TEMPerature:PROTection:LOW
[:LEVel]?
SOURce[1..n]:TEMPerature:PROTection:HIGH
[:LEVel]?
SOURce[1..n]:TEMPerature:PROTection:STEP?
SOURce[1..n]:TEMPerature:PROTection:
RESolution?
SOURce[1..n]:CURRent:LIMit:LOW?
SOURce[1..n]:CURRent:LIMit:HIGH?
SOURce[1..n]:CURRent:STEP?
SOURce[1..n]:CURRent:RESolution?
SOURce[1..n]:WAVelength:MODE
SOURce[1..n]:PULM:STATe
:SOURce[1..n]:ACCOutput