EXFO IQS-2400 WDM Laser Source for IQS-500/600 - Manual (Page 176)

SCPI Command Reference
170 IQS-2400
Product-Specific Commands—Description
:SOURce[1..n]:WAVelength:LIMit:LOW?
Description Depending on the current spectral unit, this
query returns the minimum wavelength or the
maximum frequency at which the laser can be
set with the SOURce[1..n]:APCOutput command.
*RST has no effect on this command.
Syntax :SOURce[1..n]:WAVelength:LIMit:LOW?
Parameter(s) None
Response Syntax <LimitLow>
Response(s) LimitLow:
The response data syntax for <LimitLow> is
defined as a <NR3 NUMERIC RESPONSE DATA>
element.
The <LimitLow> response is the lowest
selectable wavelength in meters or the highest
selectable frequency in Hz. To select the current
spectrum unit, use the UNIT[1..n]:SPECtrum
command.
Example(s) SOUR:WAV:LIM:LOW?
See Also SOURce[1..n]:APCOutput
SOURce[1..n]:WAVelength:LIMit:HIGH?
SOURce[1..n]:WAVelength:LIMit:STEP?
UNIT[1..n]:SPECtrum