measurement connection mode, Measurement connection mode – CIRCUTOR CVM-B Series User Manual
Page 130
5�6�5�-
Measurement connection mode�
This screen,
, is for selecting the measurement connection mode.
figure 118: Measurement connection mode configuration screen.
The following options appear in the lower area:
Single-phase.
Two-phase.
Two-phase with neutral.
Three-phase.
Three-phase with neutral.
Aron.
Confirm, confirms and saves in the memory the value programmed on the screen
�
Back, returns to the home screen of the setup menu
.
Main Menu, back to the main menu,
figure 25
.
Use the keys
and
to select the different options.
To confirm the selection, press the key
.
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
130
CVM-B100 - CVM-B150
Instruction Manual