CIRCUTOR CVM-B Series User Manual
Page 134
Calculated current, to select a software-based calculation by the unit of the neutral
current.
● For all parameters:
Previous, selects the previous parameter
�
Next, selects the next parameter
�
Confirm, confirms and saves in the memory the value programmed on the screen
�
Delete character, deletes the selected character
�
Delete parameter, deletes the characters of the selected parameter.
Back, returns to the home screen of the setup menu
.
Main Menu, back to the main menu,
figure 25
.
Use the keys
and
to select the different options.
To confirm the selection, press the key
.
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
Primary current:
For /5A and /1A secondary current:
Maximum value: 10000.
For MC type secondary current:
Maximum value: 1500.
Minimum value: 1.
Primary neutral current:
Maximum value: 10000.
Minimum value: 1.
The primary voltage x primary current value must be less than
60MW.
134
CVM-B100 - CVM-B150
Instruction Manual