CIRCUTOR CVM-B Series - Manual (Page 97)

5�1�5�- Standard phasors�
By selecting this option, you can view the phase sequence with the standard values
( figure 81 ).
figure 81: Standardised phasor display screen�
The following options appear in the lower area:
, , , Select the line of phasors that you are going to display: L1, L2 , L3
or all the phasors.
NB: The option selected is not displayed on the menu.
Back, returns to the home screen of the measurement display menu, figure 26�
Main Menu, back to the main menu, figure 25 .
Use the keys and to select the different options.
To confirm the selection, press the key .
The menu in the lower area disappears after a few seconds.
97 Instruction Manual
CVM-B100 - CVM-B150