CIRCUTOR CVM-B Series - Manual (Page 168)

The parameter selected is indicated in white.
The following options appear in the lower area:
● When programming the Np:
The Np is the peripheral number assigned to the unit in the Modbus network.
, ... The ten possible digits to program �
Delete character, deletes the selected character �
Delete parameter, deletes the characters of the selected parameter.
Previous, selects the previous parameter �
Next, selects the next parameter �
Confirm, confirms and saves in the memory the values programmed on the screen �
Back, returns to the main configuration screen for integrated communications.
Main Menu, back to the main menu, figure 25 .
Use the keys and to select the different options.
To confirm the selection, press the key .
Np:
Maximum value: 255.
Minimum value: 0.
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
● When programming the transmission speed, Baud rate:
, ... The possible transmission speeds : 9600, 19200, 38400, 57600, 76800
or 115200�
Previous, selects the previous parameter �
Next, selects the next parameter �
Confirm, confirms and saves in the memory the values programmed on the
screen �
Back, returns to the main configuration screen for integrated communications.
Main Menu, back to the main menu, figure 25 .
Use the keys and to select the different options.
To confirm the selection, press the key .
168
CVM-B100 - CVM-B150
Instruction Manual