display of variables – CIRCUTOR CVM-B Series User Manual
Page 135
5�6�8�-
Display of variables�
The parameters to be displayed for each type of instantaneous, incremental and demand value
are selected on this screen,
:
figure 121: Variable display configuration screen.
The parameter selected is indicated in white.
The following options appear in the lower area:
Enable display of the parameter.
Disable display of the parameter.
Previous, selects the previous parameter
�
Next, selects the next parameter
�
Confirm, confirms and saves in the memory the values programmed on the
screen
�
Back, returns to the home screen of the setup menu
Main Menu, back to the main menu,
figure 25
.
Use the keys
and
to select the different options.
To confirm the selection, press the key
.
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
135
Instruction Manual
CVM-B100 - CVM-B150