CIRCUTOR CVM-B Series User Manual
Page 166
5�6�17�3�-
Configuration of digital inputs, logic state mode.
After selecting the configuration of an input in logic mode, you must select the input that you
want to configure in this mode:
Digital input 1.
Digital input 2.
When selecting the input to configure with the key
, you can program the input
logic.
figure 136: Digital inputs configuration screen (logic state mode).
The parameter selected is indicated in white.
The following options appear in the lower area:
Positive, the digital input logic is positive
�
Negative, the digital input logic is negative
�
Previous, selects the previous parameter
�
Next, selects the next parameter
�
Confirm, confirms and saves in the memory the values programmed on the screen
�
Back, returns to the main configuration screen for digital inputs
Main Menu, back to the main menu,
figure 25
.
Use the keys
and
to select the different options.
To confirm the selection, press the key
.
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
166
CVM-B100 - CVM-B150
Instruction Manual