CIRCUTOR CVM-B Series User Manual
Page 248
7�4�3�1�-
Analogue inputs�
Select the input to configure on the main configuration screen for the analogue inputs,
.
figure 173: Main configuration screen for analogue inputs.
The following options appear in the lower area:
...
Analogue inputs from 1 to 4, to select the configuration of each of the 4
analogue inputs.
Back, returns to the main configuration screen for analogue inputs/outputs,
Main Menu, back to the main menu,
figure 25
.
Use the keys
and
to select the different options.
To confirm the selection, press the key
.
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
When selecting the input to configure,
the configuration parameters are:
The analogue input scale.
The zero.
The full scale.
The decimal position.
The analogue input name.
The units.
248
CVM-B100 - CVM-B150
Instruction Manual