CIRCUTOR CVM-B Series User Manual
Page 155
● When programming the
minimum value below which the transistor is activated:
The units and maximum and minimum values of the variables to program are shown in
Table
22
.
,
...
The ten possible digits to program
�
,
Comma and minus sign.
Delete character, deletes the selected character
�
Delete parameter, deletes the characters of the selected parameter.
Previous, selects the previous parameter
�
Next, selects the next parameter
�
Confirm, confirms and saves in the memory the values programmed on the screen
�
Back, returns to the home screen of the setup menu
Main Menu, back to the main menu,
figure 25
.
Use the keys
and
to select the different options.
To confirm the selection, press the key
.
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
● When programming the
maximum value above which the transistor is activated:
The units and maximum and minimum values of the variables to program are shown in
Table 22
.
NB: The maximum value must be greater than the minimum value programmed.
,
...
The ten possible digits to program
�
,
Comma and minus sign.
Delete character, deletes the selected character
�
Delete parameter, deletes the characters of the selected parameter.
Previous, selects the previous parameter
�
Next, selects the next parameter
�
Confirm, confirms and saves in the memory the values programmed on the screen
�
Back, returns to the home screen of the setup menu
Main Menu, back to the main menu,
figure 25
.
Use the keys
and
to select the different options.
To confirm the selection, press the key
.
155
Instruction Manual
CVM-B100 - CVM-B150