CIRCUTOR CVM-B Series - Manual (Page 53)

5�1�1�1�3�1�2�- Analogue view�
The analogue display screen is shown in figure 42 .
figure 42:Demand parameters, analog view (display 1 parameter)�
The menu in the lower area disappears after 3 seconds.
Press the
key to display the lower area again.
The lower area menu options are:
Back, returns to the demand parameters display menu screen, figure 40�
Main Menu, back to the main menu, figure 25 .
Use the keys and to browse the different options.
To access the option selected press the key .
The second red coloured needle indicates the instantaneous value of the parameter being
displayed.
If there is an alarm associated with the variable being displayed, the following will be shown:
The module with which the alarm is associated.
The associated output in the module.
The alarm status: not activated, pre-alarm activated, alarm activated.
The icon flashes during the delay time in the alarm connection (ON) and
disconnection (OFF).
53 Instruction Manual
CVM-B100 - CVM-B150