CIRCUTOR CVM-B Series User Manual
Page 253
● When programming the
scale:
0... 20mA, to select the scale from 0 to 20mA
�
4... 20mA, to select the scale from 4 to 20mA
�
0... 10V, to select the scale from 0 to 10V
�
Previous, selects the previous parameter
�
Next, selects the next parameter
�
Confirm, confirms and saves in the memory the values programmed on the screen
�
Back, returns to the home screen of the analogue inputs menu
Main Menu, back to the main menu,
figure 25
.
● When programming the
Zero and the full-scale value:
Zero is the value for which you have the start of the analogue output, 0 or 4mA.
The
full-scale is the value for which you have the end of the analogue output, 20mA.
,
...
the ten possible digits to program
�
Negative, the minus sign
�
Comma, the comma.
Delete character, deletes the selected character
�
Delete parameter, deletes the characters of the selected parameter.
Previous, selects the previous parameter
�
Next, selects the next parameter
�
Confirm, confirms and saves in the memory the values programmed on the screen
�
Back, returns to the home screen of the analogue inputs menu
Main Menu, back to the main menu,
figure 25
.
Zero Value:
Maximum and Minimum value:
full-scale:
Maximum and Minimum value:
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
253
Instruction Manual
CVM-B100 - CVM-B150