CIRCUTOR CVM-B Series User Manual
Page 266
● When programming the
parity:
Even parity.
Odd parity.
No parity.
Previous, selects the previous parameter
�
Next, selects the next parameter
�
Confirm, confirms and saves the values programmed on the screen in the
memory
�
Back, returns to the main configuration screen of the Modbus TCP module,
Main Menu, returns to the main menu,
figure 25
.
Use the
and
buttons to select the different options.
To confirm the selection, press the
button.
If no button is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
● When programming the
number of stop bits:
,
Possible numbers of stop bits
: 1 or 2�
Previous, selects the previous parameter
�
Next, selects the next parameter
�
Confirm, confirms and saves the values programmed on the screen in the
memory
�
Back, returns to the main configuration screen of the Modbus TCP module,
Main Menu, returns to the main menu,
figure 25
.
Use the
and
buttons to select the different options.
To confirm the selection, press the
button.
If no button is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
266
CVM-B100 - CVM-B150
Instruction Manual