CIRCUTOR CVM-B Series User Manual
Page 252
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
When selecting the output to configure,
the configuration parameters are:
Variable code.
The scale.
The zero
The full scale.
figure 176: Analogue outputs configuration screen.
The parameter selected is indicated in white.
The following options appear in the lower area:
● When programming the
variable code which controls the analogue output (
Table 21
):
,
...
the ten possible digits to program
�
Delete character, deletes the selected character
�
Delete parameter, deletes the characters of the selected parameter.
Previous, selects the previous parameter
�
Next, selects the next parameter
�
Confirm, confirms and saves in the memory the values programmed on the screen
�
Back, returns to the main configuration screen for analogue outputs,
Main Menu, back to the main menu,
figure 25
.
252
CVM-B100 - CVM-B150
Instruction Manual