WaveWare CommTech MaxPage - Manual (Page 81)

Manual MAXPage
© Commtech Wireless Page 81
7.2 Voice Pager Tone Charts
Sometimes a dispatch centre will use a three digit code to designate your pager tone frequencies. If
you are given a three-digit code such as 102 with a 122 Group call, the tone charts below can be used
to determine the tone frequencies. The first digit indicates the TONE GROUP. There are six
Motorola tone groups. Code 102 means that the codes are selected from Group 1. The A tone would
be Tone number zero (330.5) and the B tone would be 368.5. Code 122 simply means a long second
tone (368.5).
Each tone has both a Frequency and a Reed Code.
The first digit of the Reed Code is the Reed Group, and the second and third digits are the Reed Tones.
Tone No. Reed Group 1 Reed Group 2 Reed Group 3
Reed
Code
Frequency
Hz.
Reed
Code
Frequency
Hz.
Reed
Code
Frequency
Hz.
1 111 349.0 121 600.9 138 288.5
2 112 368.5 122 634.5 108 296.5
3 113 389.0 123 669.9 139 304.7
4 114 410.8 124 707.3 109 313.0
5 115 433.7 125 746.8 160 953.7
6 116 457.9 126 788.5 130 979.9
7 117 483.5 127 832.5 161 1006.9
8 118 510.5 128 879.0 131 1034.7
9 119 539.0 129 928.1 162 1063.2
0 110 330.5 120 569.1 189 1092.4
Tone No. Reed Group 4 Reed Group 5 Reed Group 6
Reed
Code
Frequency
Hz.
Reed
Code
Frequency
Hz.
Reed
Code
Frequency
Hz.
1 141 339.6 151 584.8 191 1153.4
2 142 358.6 152 617.4 192 1185.2
3 143 378.6 153 651.9 193 1217.8
4 144 399.8 154 688.3 194 1251.4
5 145 422.1 155 726.8 195 1285.8
6 146 445.7 156 767.4 196 1321.3
7 147 470.5 157 810.2 197 1357.6
8 148 496.8 158 855.5 198 1395.0
9 149 524.6 159 903.2 199 1433.4
0 140 321.7 150 553.9 190 1122.5
™ NOTE: There are two other tone groups 11 and 12 that are rarely used.