Comtech EF Data CST-5000 - Manual (Page 39)

CST-5000 C-Band Satellite Terminal Single Thread System Installation
Rev. 9 2–11
c. Position a 14 inch (35.6 cm)
unistrut (open side facing
up) over one of the 8 inch
(20.3 cm) unistruts.
Ensure the 14 (35.6 cm)
unistrut is centered over the
RFT.
d. Using two 5/16-18 x 1-1/4
inch (3.2 cm) bolts, 5/16
inch (8 mm) split
lockwashers, and 5/16 inch
(8 mm) flat washers, attach
the 14 inch (35.6 cm)
unistrut to the 8 inch
(20.3 cm) unistrut.
Note: The bolts should be installed in the fifth hole from each end, as illustrated.
Tighten the bolts firmly.
e. Attach the second 14 inch (35.6 cm) unistrut to the second 8 inch (20.3 cm)
unistrut by repeating Steps 3.a. through 3.d.