Comtech EF Data CST-5000 - Manual (Page 86)

CST-5000 C-Band Satellite Terminal Operation
Rev. 9 4–11
4.4.3 Faults
The FAULTS (Figure 4-5) menu is accessible from the SELECT menu. Faults are similar
to monitor functions, as they display the current fault status of the group being displayed.
Press [
← ] or [ → ] to move between the faults.
The current fault status is displayed as “OK” or “FLT” for each parameter monitored.
“OK” indicates that no fault exists, while “FLT” indicates that a fault exists.
Press [CLEAR] to exit this level of operation and return to the previous level.