KIP PrintPro.Net User Manual
Page 42
Advertising
![background image](/files/793603/content/doc042.png)
KIP PrintPro.Net User Guide
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP. 2015 KIP. v1
- 42 -
Component
Function
•
Maximum Image
Length
Maximum Image Length [slide bar]
Maximum cut length should match the capabilities of the
printer.
•
Settings in (mm) or (") depending on PrintPro.Net page
language.
•
Set to printer max print length
•
Enable Bypass
Feeder
Enable Bypass Feeder [check box]
•
Enables the cut sheet bypass on the printer
•
Roll Adjustments
Roll Adjustments [Edit button]:
Adjustment moves the image left (-) or right (+) to center on the
media in case the media is offset on the paper core.
Advertising