KIP PrintPro.Net - Manual (Page 45)

KIP PrintPro.Net User Guide
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP.  2015 KIP. v1
- 45 -
Component Function
• Default Screen
Select the default screen that the system will open to when
started or if the reset timer is being used.
• Interface Reset
Timer
Setting a value in the reset timer will return the KIP to default
settings when the timer is reached.
• Enable Network
Interrupt
Check the box to allow network interruption of the queue.
16. Separator Sheets
Separator sheets can be configured to print between each set
or after each job. Separator sheets contain information
regarding current print job such as:
• Set Number
• Job Number
• Requester
• File Name
• Total Output
Note: The Separator sheet information can be edited by simply
dragging the unwanted tag to the Don’t Print window.