KIP PrintPro.Net - Manual (Page 59)

KIP PrintPro.Net User Guide
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP.  2015 KIP. v1
- 59 -
Step Action Illustration
8. Black/White Settings - There
are multiple settings that can
be applied to this selection:
Despeckle - This option removes black pixels in black & white mode, for example
from scans of murky originals. The filter searches for groups of black pixels and
converts them into white. Small-sized pixel groups, such as those forming punctuation
dots, are kept.
All Pixel Neighbors - Pixels are connected neighbors when there is a series of 8
(instead of 4) adjacent pixels, i.e. additionally to pixels of the same row or column,
the diagonally-adjacent pixels are considered to be connected.
Filter Size – It corresponds to the maximum "diameter" of the pixel area which is to be
removed.
Hole Filling - This function makes it possible to remove single pixel-sized white holes
from black areas in b&w mode.
Invert – Changes black to white and white to black
9. Reset/Save/Save (activated)
–
Reset – Resets to default
settings
Save – Saves the new preset
but does not make it active
for use.
Save (activated) – Saves the
new preset activated and
ready for use.