NavCom SF-3040 Rev.F - Manual (Page 110)

SF-3040 Product User Guide
– Rev. F
5-108

StarUtil 3000

Sapphire Message SFLICENSEB (described in
the Sapphire Technical Reference Manual)
(Refer to Related Documents in the fore-matter.)
Verify this StarFire license data:

The StarFire license is saved as one of these
license types:

Primary StarFire License: Currently active
license
OR

Secondary (Backup) StarFire License:
Inactive license that becomes active at the
expiration of the Primary StarFire license

Duration of the saved license and the valid areas
of operation
For special-case scenarios, customers may request
to receive the StarFire license via email to manually
upload via StarUtil 3000. The request must be
specified in the purchase order.

The broadcast procedure for Over the Air
StarFire Licensing is subject to change.
Setting Up a StarFire Priority Network
The SF-3040 defaults to using the highest available
satellite between both networks. If multiple receivers
are used on one platform, the user may force one to
use Net1 and the other to use Net2.
1. On the Input Terminal, type [SFNETPRIORITY] to
view the current priority net settings.
2. Perform one of the following:

Type [SFNETPRIORITY]DEFAULT to
command the system to automatically select