NavCom SF-3040 Rev.F - Manual (Page 54)

SF-3040 Product User Guide
– Rev. F
2-52
Chapter 2 ................... Introduction/Features
GNSS Receiver
( rear view )
The lightweight SF-3040 GNSS receiver delivers
unmatched accuracy to the precise positioning
community. This unique unit is designed to use
NavCom’s StarFire™
1
network, a worldwide Satellite
Based Augmentation System (SBAS) for decimeter-
level position accuracy (post-convergence
period).The receiver is also capable of RTK, RTCM
(code and phase), and CMR/CMR+ DGPS operating
methods. The operating software supports an
optional internal UHF radio modem. Refer to Chapter
7 for details on the removable radio modem.
The ability to receive NavCom’s unique StarFire
correction service is fully integrated within each unit.
A single set of corrections can be used globally
enabling a user to achieve decimeter level positioning
accuracy without the need to deploy a separate base
station, thus saving time and capital expenditure.

The StarFire license is not included in
the price of the SF-3040.
StarFire position outputs are referenced to the
ITRF2008 datum and to the GRS80 ellipsoid.
The SF-3040 pole-mounted GNSS receiver with
integrated antenna is suitable for use in multiple
outdoor applications where it will be subjected to
continuous operation in dust, water-splash, and rain
(but not complete immersion), temperature variations,
and sunlight/UV radiation (refer to Environmental
Specifications in Appendix A).